Cheap Outdoor Solar-Powered Column Lights are becoming increasingly popular for those seeking an efficient and cost-effective way to illuminate their outdoor spaces. To ensure reliable operation, these lights must be installed and wired correctly. The first step, when installing Cheap Outdoor Solar-Powered Column Lights, is to check the installation site for sun exposure, in order to determine the best placement for the light. The next step is to mount the light to the column or base and then to the wall or fence. This is usually done using nuts and bolts supplied with the light. Next, an electrical conduit should be run from the source of power to the light, as this will ensure a safe and protected connection. Keep in mind that the conduit must be at least 18" in size, to allow for sufficient power to reach the light. Once the conduit is in place, the wiring can be run through it. The wiring used should be able to handle up to 12V of power, and should be long enough to reach from the power source to the light. The last step in wiring up Cheap Outdoor Solar-Powered Column Lights is to connect the wires to the light. The housings of the lights should contain two small holes that contain spring-loaded clips. These clips can be used to attach the wires to the light. Each wire should be labeled "positive" and "negative" and should be connected to the corresponding clips. Once the wiring is complete, Cheap Outdoor Solar-Powered Column Lights are ready to be used. All that is left to do is to plug in the power source and the lights should turn on. Enjoy your new outdoor illumination!